Revit MEP 2023 Basics (BIM For Contractor) Crash Course

Learn Revit MEP in 6 hrs!! (Modelling & Coordination & Introduction to Sheets) & Mainly Mechanical + Electrical Basics

Created by : Rated :4.4 913 views

Last Updated: 2023-07-06 09:07:01 English Course Type: Self Learning

You Will Learn the concept of Revit MEP.
You Will Learn how to make Modelling with Revit.
You Will Learn how to make Coordination with Revit.
You Will Learn how to extract sheets from Revit.
You Will Learn how to make Schedules with Revit.
You Will Learn how to make Project Templates with Revit.

Course Main Contents:

Introduction
Starting New Project
MEP Template
MEP Modelling
MEP Coordination (Coordination with Arch & ST)
MEP Coordination (Coordination between MEP Services)
MEP Sheets Extraction
Schedules (BOQ Extraction)
Work-sharing (Central & Local files)

Notes:

You will have introduction for the steps of the project.
The idea of the course is to learn the Revit basics from the contractor point of view, also to learn the Revit mep in very short time, after the course you will have full technical support.
You will learn how to start new MEP project.
You will learn how link and coordinate with Arch & Structure.
You will learn how to create mechanical template (Additional duct systems-Additional pipe systems-Tags & Dimensions....)
You will learn how to make coordination between MEP Services.
You will learn how to extract sheets from Revit.
You will learn how to extract schedules from Revit.
the version of Revit is 2023 but the course is applicable for any version of Revit.
you will learn how to make HVAC model, Plumbing model and FF model.
you will learn how to make electrical model.
The course implemented on small scale project, but it is applicable for any size of projects, you will learn the steps general for the project.

Mechanical IFC Concept
Construction Concept (it is ok if don't have these experience)
BIM Concept (it is ok if don't have these experience)
Shop Drawings Concept (it is ok if don't have these experience)

Mechanical Students
Mechanical Engineers
Mechanical BIM Engineers

Section 1 : Introduction 4 Lectures 00:16:42
Lecture 1 :
Introduction 1 (BIM vs Traditional) Preview
Lecture 2 :
Introduction 2 (Input & Output)
Lecture 3 :
Introduction 3 (Project General Steps)
Lecture 4 :
Revit Interface
Section 2 : Create New Project 3 Lectures 00:13:37
Lecture 1 :
Create New Project & Insert Arch and ST Links
Lecture 2 :
Copy Monitor for Levels & Grids
Lecture 3 :
Create Floor & Ceiling Views
Section 3 : Mechanical Modelling Basics 4 Lectures 00:34:26
Lecture 1 :
Mechanical Modelling Basics 1 (Duct & Pipe Modelling)
Lecture 2 :
Mechanical Modelling Basics 2 (Duct & Pipe Modelling)
Lecture 3 :
Visibility Graphics
Lecture 4 :
Visibility Graphics (Filters)
Section 4 : Project Template & View Template 4 Lectures 00:35:42
Lecture 1 :
Project Template & View Template Introduction
Lecture 2 :
Project Template (Pipe Systems & Duct Systems)
Lecture 3 :
Project Template (Pipe types & Project units)
Lecture 4 :
Project Template (Tags & dimensions)
Section 5 : MEP Modelling Preparation 2 Lectures 00:09:34
Lecture 1 :
Modelling Preparation (Insert CAD)
Lecture 2 :
Modelling Preparation (Load Families)
Section 6 : HVAC Modelling 4 Lectures 00:35:39
Lecture 1 :
HVAC Modelling 1
Lecture 2 :
HVAC Modelling 2
Lecture 3 :
HVAC Modelling 3
Lecture 4 :
Schedules
Section 7 : Water Supply Modelling 2 Lectures 00:17:29
Lecture 1 :
Water Supply Modelling 1
Lecture 2 :
Water Supply Modelling 2
Section 8 : Drainage Modelling 4 Lectures 00:35:42
Lecture 1 :
Drainage Modelling 1
Lecture 2 :
Drainage Modelling 2
Lecture 3 :
Drainage Modelling 3
Lecture 4 :
Drainage Modelling 4
Section 9 : Firefighting Modelling 1 Lectures 00:07:20
Lecture 1 :
Firefighting Modelling
Section 10 : Electrical Modelling Basics 2 Lectures 00:18:19
Lecture 1 :
Electrical Template
Lecture 2 :
Electrical Modelling
Section 11 : Coordination & Clash Detection 2 Lectures 00:00:00
Lecture 1 :
Coordination & Clash Detection 1
Lecture 2 :
Coordination & Clash Detection 2
Section 12 : Views & Sheets Preparation 7 Lectures 00:48:29
Lecture 1 :
View Template
Lecture 2 :
Scope Boxes-Duplicate Views-Match line
Lecture 3 :
Tags-Dimensions
Lecture 4 :
Annotate & Drafting View
Lecture 5 :
Drainage Tags (Sloped Pipes Tag)
Lecture 6 :
Sheet Creation-Callout-Sections-Legend-Exporting Sheet
Lecture 7 :
Sheet Creation (View Reference)
Section 13 : Project & Shared Parameters 4 Lectures 00:17:06
Lecture 1 :
Project Parameters (Type - Instance)
Lecture 2 :
Shared Parameters
Lecture 3 :
Transfer Project Standard
Lecture 4 :
Project Settings (Project Units-Object Styles-Project Info-Snaps)
Section 14 : Work-sharing (Central Files & Local Files) 3 Lectures 00:22:12
Lecture 1 :
Work-sharing 1
Lecture 2 :
Work-sharing 2
Lecture 3 :
Presenting 3D Shot

How do i access the course after purchase?
It's simple. When you sign up, you'll immediately have unlimited viewing of thousands of expert courses, paths to guide your learning, tools to measure your skills and hands-on resources like exercise files. There’s no limit on what you can learn and you can cancel at any time.
Are these video based online self-learning courses?
Yes. All of the courses comes with online video based lectures created by certified instructors. Instructors have crafted these courses with a blend of high quality interactive videos, lectures, quizzes & real world projects to give you an indepth knowledge about the topic.
Can i play & pause the course as per my convenience?
Yes absolutely & thats one of the advantage of self-paced courses. You can anytime pause or resume the course & come back & forth from one lecture to another lecture, play the videos mulitple times & so on.
How do i contact the instructor for any doubts or questions?
Most of these courses have general questions & answers already covered within the course lectures. However, if you need any further help from the instructor, you can use the inbuilt Chat with Instructor option to send a message to an instructor & they will reply you within 24 hours. You can ask as many questions as you want.
Do i need a pc to access the course or can i do it on mobile & tablet as well?
Brilliant question? Isn't it? You can access the courses on any device like PC, Mobile, Tablet & even on a smart tv. For mobile & a tablet you can download the Learnfly android or an iOS app. If mobile app is not available in your country, you can access the course directly by visting our website, its fully mobile friendly.
Do i get any certificate for the courses?
Yes. Once you complete any course on our platform along with provided assessments by the instructor, you will be eligble to get certificate of course completion.
For how long can i access my course on the platform?
You require an active subscription to access courses on our platform. If your subscription is active, you can access any course on our platform with no restrictions.
Is there any free trial?
Currently, we do not offer any free trial.
Can i cancel anytime?
Yes, you can cancel your subscription at any time. Your subscription will auto-renew until you cancel, but why would you want to?

Mohamed Gamal,

9159 Course Views

7 Courses

Have strong experience as CAD CAM Instructor: NX (CAD - CAM - CAE -Mold Wizard - CNC Post Builder, Sheet Metal) Solid Works, Inventor, Solid Edge Have strong experience in post processing for CNC machines (Milling, Turning, Wire EDM) Making a (G code) programs for a lot of mechanical products and manufacturing it in CNC machines (Milling 3 Axis, Multi Axis). Have strong knowledge of mold wizard of NX (Injection Mold Plastic ) Making a complete mold base for plastic parts and get the drawings for the manufacturing.