Embedded Systems with 8051 Micro Controller using Embedded C

Deep Dive into embedded systems with in-depth understanding of 8051 micro controller with embedded C programming

Created by : Rated :4.3 72766 views

Last Updated: 2023-03-24 12:03:32 English Course Type: Self Learning

Quickly Learn Embedded Systems with 8051 and Embedded C Programming
8051 Microcontroller
Embedded C Coding
Keil IDE
Various Interfaces with 8051 like LCD, Stepper Motor, DC Motor, ADC and many more
Barebone 8051 coding by understanding internal registers and how to configure them

Learn Embedded Systems with one of the most influential and basic microcontrollers in history, 8051

I believe that anyone can learn and experiment with technology.

All that is needed is the desire to learn and the right guidance. That’s the reason, this course is focused on both

absolute beginners and
intermediate developers in embedded systems.

We’re going to study about embedded systems with 8051 microcontrollers in this course.

8051 is by far one of the oldest microcontrollers which is still used today. With over 70+ different manufacturers, 8051 is available in a variety of flavors. What makes it special is the simplicity it offers to the programmers and developers. Being one of the first microcontrollers, the architecture of 8051 is quite simple with very few basic features. And those very basic features make 8051 the winner in terms of simplicity in usage.

In this course, we’ll study 8051 with embedded C programming. We’re going to study about the 8051 microcontrollers with Keil 8051 IDE. Keil Microvision is a very old and very popular IDE used for microcontroller programming.

This is a hands-on driven course where we’ll be writing a lot of codes and trying out its outputs. We’re going to study 8051 microcontroller and its interfacing with a number of peripheral devices like

LEDs
Switches
Relay
LCD
ADC
Temperature Sensor
Stepper Motor
DC Motor
PC Interfacing
Device Control

And while doing so, we’ll be doing a number of different experiments to evaluate the skills we have been learning. The course outcome is to enable everyone to be able to use 8051 microcontrollers and start creating projects on it.

Even if you do not know any C programming before, do not worry, there’s a brief introduction to C programming also.

This course comes from a developer

From the past 10 years, I've developed more than 150 projects on 8051 microcontrollers alone. This course doesn't come from a trainer following a set syllabus, this comes from a real developer who's involved in real projects for a better part of his career. So there are many practical considerations mentioned from the time to time in this course.

Barebone Controller Coding

Programming and using a microcontroller is not like using Arduino’s where you just write C code and download it into IC. This is a barebone coding experience where we’re going to learn the insights of 8051 microcontrollers and understand at the core how to write the program for each of its features. This single quality separates the hobbyists and professionals apart. If you’ve once understood how to go into the features of the microcontroller, look into registers and configure them to use, then you’ve understood the holy grail of embedded systems development. We’re going to do exactly this in this course. We’ll be using each feature of 8051 by completely studying the internal registers. Once you’ve understood it, you can take any microcontroller and start writing a program for it just by looking into the datasheet. The input/output pins, timers, counters, serial port, are discussed at length to understand the theory better and then we’ve done some quick experiments with it on the go.

Simulations

Many of you may or may not have an 8051 development board with you, hence, I’ve included simulation models of every single exercise that we’re going to do in this course. And I’ve also shown the downloading procedure for one of the simplest microcontrollers that I use on daily basis.

Be Assured

Believe it or not, am doing embedded systems development and training from the past 10 years. I’ve developed more than 500 different products / mini projects and trained more than 10000 students from over 65 countries. You can be assured that whatever I’ve included in this course comes not only from books but also from my experiences in developing systems.

Strong Desire to learn and excel in embedded systems
Little background of electronics
Willing to Learn 8051

Beginner, Students who are curious to learn Micro controller Programming
College and University students
Working Professionals willing to start studying embedded systems

Section 1 : Introduction 3 Lectures 00:46:56
Lecture 1 :
Introduction to Embedded Systems Preview
Lecture 2 :
Introduction to 8051 Controller
Lecture 3 :
Program for 8051
Section 2 : Software Installation 3 Lectures 00:10:46
Lecture 1 :
Installation of Keil IDE
Lecture 2 :
First Project creation on Keil
Lecture 3 :
Simulation
Section 3 : Input and Output Interfacing 3 Lectures 00:21:54
Lecture 1 :
Concepts on LED
Lecture 2 :
Project based on Led Alternate on off
Lecture 3 :
Using For Loop
Section 4 : 8051 Interfaces 2 Lectures 00:12:36
Lecture 1 :
Switch Interfacing with 8051
Lecture 2 :
Switch Exercises
Section 5 : Interfacing with DC Motor and Relay 4 Lectures 00:29:28
Lecture 1 :
Relay Interfacing
Lecture 2 :
Relay Interfacing Part 2
Lecture 3 :
Introduction To DC Motor
Lecture 4 :
DC Motor Interfacing Part 2
Section 6 : Concepts On LCD 5 Lectures 00:31:34
Lecture 1 :
Introduction To LCD
Lecture 2 :
Creating Schematics for LCD
Lecture 3 :
First Program On LCD
Lecture 4 :
LCD Up Down Counter
Hi there Try Creating an up-down counter with LCD and 2 switches. The count variable should increment whenever switch 1 is pressed and it should decrements whenever switch 2 is pressed. Solution included :) Keep Experimenting!!!
Lecture 5 :
LCD Interfacing_4
Section 7 : Concepts On Serial 4 Lectures 00:35:54
Lecture 1 :
Serial_1
Lecture 2 :
Serial_2
Lecture 3 :
Serial_3
Lecture 4 :
Serial_4
Section 8 : Timer Concepts 3 Lectures 00:20:21
Lecture 1 :
Timer_1
Lecture 2 :
Timer_2
Lecture 3 :
Timer_3
Section 9 : Timer as Counter 1 Lectures 00:07:30
Lecture 1 :
Timer as Counter
Section 10 : ADC With LM35 4 Lectures 00:36:51
Lecture 1 :
Analog to Digital Converter with 8051 - Part 1
Lecture 2 :
Analog to Digital Converter with 8051 - Part 2
Lecture 3 :
Analog to Digital Converter with 8051 - Part 3
Lecture 4 :
Analog to Digital Converter with 8051 use LM35 Temperature Sensor
Section 11 : Stepper Motor and Program for Stepper Motor 1 Lectures 00:14:53
Lecture 1 :
Concepts around Stepper Motor
Section 12 : Program Downloading 1 Lectures 00:08:39
Lecture 1 :
Program Downloading Using Nuvoton ICSP Programmer
Section 13 : Conclusion 1 Lectures 00:00:42
Lecture 1 :
Conclusion

How do i access the course after purchase?
It's simple. When you sign up, you'll immediately have unlimited viewing of thousands of expert courses, paths to guide your learning, tools to measure your skills and hands-on resources like exercise files. There’s no limit on what you can learn and you can cancel at any time.
Are these video based online self-learning courses?
Yes. All of the courses comes with online video based lectures created by certified instructors. Instructors have crafted these courses with a blend of high quality interactive videos, lectures, quizzes & real world projects to give you an indepth knowledge about the topic.
Can i play & pause the course as per my convenience?
Yes absolutely & thats one of the advantage of self-paced courses. You can anytime pause or resume the course & come back & forth from one lecture to another lecture, play the videos mulitple times & so on.
How do i contact the instructor for any doubts or questions?
Most of these courses have general questions & answers already covered within the course lectures. However, if you need any further help from the instructor, you can use the inbuilt Chat with Instructor option to send a message to an instructor & they will reply you within 24 hours. You can ask as many questions as you want.
Do i need a pc to access the course or can i do it on mobile & tablet as well?
Brilliant question? Isn't it? You can access the courses on any device like PC, Mobile, Tablet & even on a smart tv. For mobile & a tablet you can download the Learnfly android or an iOS app. If mobile app is not available in your country, you can access the course directly by visting our website, its fully mobile friendly.
Do i get any certificate for the courses?
Yes. Once you complete any course on our platform along with provided assessments by the instructor, you will be eligble to get certificate of course completion.
For how long can i access my course on the platform?
You require an active subscription to access courses on our platform. If your subscription is active, you can access any course on our platform with no restrictions.
Is there any free trial?
Currently, we do not offer any free trial.
Can i cancel anytime?
Yes, you can cancel your subscription at any time. Your subscription will auto-renew until you cancel, but why would you want to?

Amit Rana ,

529852 Course Views

6 Courses

Amit Rana is an Industrial Consultant for the Internet of Things, Embedded Systems Product Development Specialist, Online and Corporate Trainer. Currently building a platform for everyone to learn technologies online. Technologies including Internet of Things, Embedded Systems, Machine learning, Programming, and PCB Design through an online platform called kitflix.com Kitflix.com is all about learning technologies online via tutorials/video lectures and interesting project works. Amit Rana holds a Masters Degree in Electronics Engineering. He has 10+ years of Experience in Embedded System Designing and programming using various microcontrollers, And have deployed more than 250 different embedded and IoT projects around a variety of Industries Amit has Worked on multiple Embedded technologies and devices for the development of customized embedded solutions for industries and various product development requirements. Ranging from simple counter to IoT system for CNC machines and end to end product development for smart cars, Amit has made his passion for electronics and programming a hobby and a full-time profession Amit is also a professional writer who writes blogs on technology and education. He has done writing assignments on technical documents writing for few clients and he writes blogs on his website. Amit is an avid reader and loves cooking., he loves to read books on various topics and spends his spare time with his family cooking a variety of dishes with his kids. Website: www.vidyarobotics.com, www.kitflix.com